Page 1
ALT58BC ALT58BC401 Original instructions...
Page 2
mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Page 4
Replacing the brushcutter head Replacing the line trimmer head Installing the blade head Installing the line trimmer head...
Page 5
Attaching the harness Installing the bike handle Installing the brushcutter guard Installing the line trimmer guard...
Page 6
Starting the product Attaching the lower shaft Reloading the trimming line Cleaning the product...
Page 7
Inserting and removing the battery pack Storing the product Operating the line trimmer Operating the brushcutter...
Page 8
THROTTLE LOCK LINE TRIMMER GUARD LINE TRIMMER HEAD THROTTLE TRIGGER BLADE HEAD BRUSHCUTTER GUARD LOWER SHAFT...
Page 9
HARNESS ATTACHMENT HANGER BIKE HANDLE UPPER SHAFT KNOB...
Page 13
Installing the blade head NOTE: When installing the blade head, always use a new nylon locking nut. Not using a new nylon locking nut can result in damage to the product or injury to the user.
Page 14
NOTE: Make sure that the nylon locking nut torque is ≥ 25 Nm when assembling the blade. Failure to follow this procedure can result in serious injury. Nylon locking nut should have at least 4 turns after finger tight.
Page 18
NOTE: When installing the blade head, always use a new nylon locking nut. Not using a new nylon locking nut can result in damage to the product or injury to the user.
Page 19
NOTE: Make sure that the nylon locking nut torque is ≥ 25 Nm when assembling the blade. Failure to follow this procedure can result in serious injury. Nylon locking nut should have at least 4 turns after finger tight.
Page 41
TECHNICAL DATA CORDLESS LINE TRIMMER / BRUSHCUTTER ALT58BC/ALT58BC401 Voltage 58V d.c. No-load speed - Line trimmer 5150/min - Cut swath 430 mm No-load speed - Brushcutter 5800/min - Cut swath 256 mm Cutting line diameter 2.4 mm Cutting capacity - Line trimmer...
Page 42
shock if your body is earthed or grounded WARNING! This product is not intended to be used by children or ■ Do not expose power tools to rain or wet conditions. Water entering a persons with reduced physical, mental, or sensory capabilities, or lack of power tool will increase the risk of electric shock.
Page 43
WARNING! Never use cutting means or attachments, which are not ● before checking, cleaning, and working on the product specified by AEG in this manual. This includes the use of metal multi- ● before changing accessories piece pivoting chains and flail-blades. These items are known to break up during use and present high risk of serious injury to the operator or ●...
Page 44
Should components need to be replaced which have work practices are all thought to contribute to the development of these not been described, please contact one of our AEG service agents (see our symptoms. There are measures that can be taken by the operator to possibly list of guarantee/service addresses).
Page 45
proper tightness to ensure that the product is in safe working condition. Any part that is damaged should be properly repaired or replaced by an authorised Wear eye, ear, and head protection. service centre. Bring the product to an authorised service centre to replace damaged or unreadable labels.
Page 46
The following signal words and meanings are intended to explain the levels of risk associated with this product. DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Need help?
Do you have a question about the ALT58BC and is the answer not in the manual?
Questions and answers