Advertisement
Advertisement
Table of Contents
Related Manuals for PolyVision Nota
Summary of Contents for PolyVision Nota
- Page 1 Installation + Maintenance Guide For Nota™, your personal command center...
- Page 3 Getting Started Tools Needed: • Cordless drill/driver • Phillips Head Screwdriver • Small hammer or mallet • Drill bit – 15/64” (6 mm) for plaster/drywall and concrete or 3/32” (2.4 mm) for wood surface • Small level • Measuring tape Hardware Included: •...
- Page 4 Installation Instructions Step 1 Determine if the Nota board will be mounted to wood, plaster/drywall or concrete. For wood surface: Secure the screw directly into the wood, plastic wall anchor is not recommended. Plaster/drywall or concrete surface: Plastic wall anchor is recommended.
- Page 5 Step 9 With the Allen wrench, tighten all four sets of screws so that the product is secure. Step 10 Follow initial cleaning instructions on page 6 and start using Nota for all your life planning and organization.
- Page 6 Cleaning and Care Before First Use Remove Markings + Residue • Moisten a clean cloth or paper towel • Accidentally use a permanent marker on with any glass cleaner (like Windex) or your board? Just write over it with a dry high-quality whiteboard cleaner.
- Page 7 About and Warranty Made from CeramicSteel, which is a porcelain enamel fused to steel, Nota is one of the most durable personal whiteboards on the market. The long-lasting surface won’t scratch or ghost and no matter how many times you clean your board, the surface won’t wear over time.
- Page 8 polyvision.com...
Need help?
Do you have a question about the Nota and is the answer not in the manual?
Questions and answers