Table of Contents
Advertisement
2.2 Back Panel
On the back panel, ZSR0104C SERIES has 4 RJ-45 10/100Mbps Ethernet LAN ports, and 1 RJ-45
10/100Mbps Ethernet WAN port. In addition, it has a Reload button and a Power Connector (7.5V
0.7A). (Figure 2-2)
ZSR0104CP Rear Panel
ZSR0104C Rear Panel
1. Local LAN Ports
ZSR0104C SERIES can function as a communication bridge between the LAN and the WAN. The
4 LAN ports can connect ZSR0104C SERIES to the client PCs in the LAN.
2. Internet WAN Port
The Internet WAN port provides connection between ZSR0104C SERIES and Cable Modem or
xDSL Box.
3. Reset Button
The reset Button can be used to restore the factory default parameters such as the password and
configuration settings.If you forget your password or want to restore the factory default settings into
your ZSR0104C SERIES, use the reset button to restore the factory default settings.
Step 1. Disconnect ZSR0104C SERIES power adapter from the power outlet.
Step 2. Press the Reset button on the back panel and keep holding it. Then plug ZSR0104C
Figure 2-2
Page 6
Advertisement
Table of Contents
