Makro Detektor JEOHUNTER 3D Dual System User Manual page 41

5. The operator lifts the detector head "40 cm" above ground and after
resetting lower the detector head "5-10 cm" parallel to the ground.
6. If there is no ground effect on the
device there is no interaction on
the bar that is indicated in the
figure and "Ground Setting 100%
Completed"
displayed. In this case the device
is ready for exploring and you may
switch to
pressing the "ACCEPT" button.
7. In case there is ground effect on
the device
observed
ADJUST" bars that are indicated
in the figure. To eliminate this
effect press "-" button for "-" effect
and press "+" button for "+" effect.
Press "-" or "+" buttons until this
effect is eliminated and "Ground
Setting
expression is displayed.
expression
explore mode
an interaction
in the "GROUND
100% Completed"
is
by
is
41