Advertisement
Introduction
Thank you for purchasing the USB SuperBooster Transmitter Dongle. The USB
SuperBooster Transmitter Dongle is one component of a complete solution that, when
paired with a receiver (sold separately) allows you to conquer USB length limitations and
put your USB devices where you need them. This wall plate solution extends the distance
of a USB device to a host computer up to 150ft so you can place your USB projector,
camera, printer, or other USB device exactly where you want it! The USB SuperBooster
Dongle is powerful yet simple, with no drivers to install or special software required. It
is also compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and receiver unit incorporated
into single gang Decora compatible wall plates or dongles. Numerous receiver options
are available so you can customize the configuration to meet your own needs. Choose
from a two-port wall plate receiver, a two-port dongle receiver, or a four-port dongle
receiver. These options are ideal for applications where you need more than one USB
device on the receiver side or you need a dongle instead of a wall plate on the receiver
side.
The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 UTP cable
allowing for easy installation. This makes for a clean, finished installation important for
home owners, classrooms, offices and anywhere you don't want visible cables lying
around. Use pre-terminated network cables or pull un-terminated cable and use the
included tool-less IDC RJ45 connector. The USB SuperBooster Dongle is bus-powered
so no external power source is required.
1
Advertisement
