NeoLight Skylife Quick Reference Manual page 2

P o w e r O n
NEOLIGHT SKYLIFE
PHOTOTHERAPY VERSION 1.0
Press and hold power
button to START
device. System notify's
once self-check
completed*.
P o w e r O f f
To disconnect device, slide the
jacket away from controller
Press and hold power button
to turn off. Always turn
off and disconnect device
from power outlet during
cleaning.
*Actual display may vary based on software version.
** LED lifetime refers to the number of hours the LED modules have been used to date.
*** See Package Insert for Full Instructions, Warnings, Precautions,
Contraindications, and Cleaning Instructions
Learn more at theneolight.com
275 N Gateway Dr, Suite 128
Phoenix, AZ USA
hello@theneolight.com
P o w e r O n
S y s t e m H o u r s
LED LIFETIME
2,435 HRS
System will display LED
lifetime**. Verify that
time is less than
25,000 hrs.
C l e a n
R e m o v e C o v e r
Remove CloudCover. Do
not remove GelMat during
cleaning.
Maximized Spectral Power for
Optimized Phototherapy
t h e S y s t e m
L i g h t I n t e n s i t y
Press '+' button once to
begin treatment. Use '+'
and '-' buttons to increase
or decrease light intensity.
T h e S y s t e m
D i s i n f e c t S y s t e m
Wipe down GelMat and
exposed edges of Light Bed
with disinfectant wipes.
Allow surface to dry.
I n t e r m i t e n t T h e r a p y
Pause treatment, press
power button once.
Resume treatment,
press power button
once again.
F i n i s h C l e a n i n g
Remove any remaining
chemical residue using
clean damp cloth.
Allow surface to dry***.
MKT-002 Rev. C
©2020 NeoLight, LLC. All Rights Reserved