K-Rain Sure Throw ST-IS45 Instruction Sheet

Sure Throw
Pop-Up Impact Sprinkler
INSTALLATION INSTRUCTIONS
Option One:
Option Two:
™
Connect the
water pipe to
pop-up side
inlet.
a) Connect the
water pipe to
pop-up bottom
inlet through the
swing assembly.
b) Fill the bottom
layer with sand.
c) Fill the second
layer with gravel/
small stones.
d) Fill the third
layer with sand/
excavated soil.
MAINTENANCE
a) Raise Cover
Insert Key and lift inner
mechanism as shown.
b) Lift Slip Spring
Lift slip spring as shown.
c) Insert The Wrench
Insert wrench into housing
from the right side of the
sprinkler (near the diffuser
screw) as shown. Ensure
that bottom of wrench handle
completely support the cover.
d) Removing Sprinkler
Assembly Turn anti-clock
wise to unscrew stem and
sprinkler assembly, and lift
out of housing.
e) Removing Filter
Remove filter and clean
by flushing with water use
pliers for filter remove as
shown to disassemble and
reassemble the sprinkler.
f) To Re-assemble
Insert complete assembly
and turn clock wise.
Lower slip spring and
remove wrench.