Maintenance And Service - Garland ROLL&COMB 141EUS-V20 Instruction Manual

Never leave this machine unattended.
Do not allow anybody into the working area
whilst the machine is in use. The working
perimeter is minimum 15 meters and this is the
danger zone.
Clean and remove obstacles from the working
area that could cause accidents prior to use.
Do not use accessories on this machine except
those recommended by the manufacturer
as otherwise the use of non recommended
accessories could cause severe damages to the
user and to the machine.
6.1. HOLDING AND GUIDING THE MACHINE
Whilst working, hold the machine firmly with
both hands on the handles.
Attention! Do not use the machine with just one
hand.
Attention! The machine can jump up or forwards
inadvertently, if the comber hit something hard
that is underground such as big stones, roots
or trunks or if the ground is too hard or if it is
frozen. Always hold the machine firmly with both
hands.
Attention! Always keep an eye as to where the
electric cable is whilst working. Be careful and
ensure that your feet or any object get tangled
with the cable.
6.2. WORKING WITH THE COMBER
Only use this machine to rake artificial grass.
Before starting to use the machine check that
the comber is not in contact with any object and
that they can move freely.
Maintain the cable well away from the moving
elements.
Place the machine on the work area with the
comber on the floor.
Press the On/Off switch
Move the machine slowly over the surface,
pressing lightly

7. MAINTENANCE AND SERVICE

The removal of security devices,
inappropriate maintenance or the
substitution of parts by non original
parts could cause severe injuries.
Always do maintenance work with the machine
unplugged from the mains.
Unplug the machine before carrying
out any work on the machine. Read
the instruction manual before carrying
out any maintenance work.
Attention! The roll of Roll&Comb
don't stop automatically once the
engine has been stopped.
7.1. MAINTENANCE AFTER WORKING
WITH THE MACHINE
Carry out the following checks when you have
finished working to ensure that the machine
works well in the future.
Check the cable and ensure that the cable has
neither worn off or has been cut.
Clean the machine and especially the ventilating
windows with a
7.2. PERIODIC MAINTENANCE
Carry out periodic inspections on the machine
to ensure its adequate and efficient use. Once,
each season take the machine to your nearest
after sales service for a complete maintenance.
Always use original spare parts to guarantee the
best performance of the machine and to avoid
risks and dangers to the user. These spare parts
should be purchased in your nearest after sales
service.
The use of non original and official spare parts
can cause accidents, personal damages to the
user and can cause the machine to break.
9/32
English