Related Manuals for Full Support EASIAIR 2020
Summary of Contents for Full Support EASIAIR 2020
- Page 1 THE RPE EXPERTS EASIAIR ® Powered Air Kit Instructions For Use CE Approved to BS EN 12941:1998+A1:2003+A2:2008 Respiratory Protective Device Powered Air Kit, incorporating a soft hood Class TH 3 P R SL...
- Page 2 EASIAIR ® IMPORTANT This Instructions For Use (IFU) manual must be read and fully understood before using the Easiair 2020 Powered Air Kit. ® It is imperative that these user instructions are strictly followed when using/operating the product(s) in question. Failure to follow these instructions may invalidate any warranty protection that is offered or available to you in respect of the product(s).
-
Page 3: Table Of Contents
EASIAIR ® CONTENTS Introduction Range of applications Approvals Conditions of use Unpacking Before use Assembly & Donning Cleaning & Maintenance Fault finding Storage Technical data Warranty THE RPE EXPERTS... -
Page 4: Introduction
EASIAIR ® 1. INTRODUCTION The Easiair 2020 Powered Air Kit circulates clean pressured air around a loose-fitting hood. The belt-mounted ® blower unit delivers air through a filter, via a hose, into the hooded headpiece. The constant supply of filtered air creates positive pressure inside the headpiece, which prevents external contaminated air from entering the user’s breathing zone. -
Page 5: Conditions Of Use
EASIAIR ® 4. CONDITIONS OF USE The Easiair 2020 Powered Air Kit is for use by trained personnel only. Training should be provided by the ® manufacturer, a qualified delegate, or a competent individual either in person or online. Before assembling, visually inspect all components for damage or wear. Ensure that all components are genuine and assembled according to this IFU manual. -
Page 6: Unpacking
EASIAIR ® 5. UNPACKING Check that the package is complete and that no part has been damaged due to transport or storage. Easiair 2020 Powered Air Kit ® Item No. Description Product Code Easiair 2020 Blower Unit FSM48 ® Easiair 2020 Full Soft Hood c/w Headgear FSM41 ®... -
Page 7: Before Use
EASIAIR ® 6. BEFORE USE Every time before using the device, you should check that: • All components are in good conition, with no visible damage (holes, scratches, tears, etc.). Any damaged or worn parts should be replaced before assembling. •... -
Page 8: Assembly & Donning
EASIAIR ® 6.3 Testing the battery To test the level of an equipped battery: • Turn on the blower unit. • The battery level will be displayed on the control panel briefly by flashing red LED lights: - 1 LED = 25% - 2 LED = 50% - 3 LED = 75% - 4 LED = 100%... - Page 9 EASIAIR ® 7.2 Filters The Easiair 2020 Powered Air Kit is only compatible with ® genuine TH3 PR SL filters and pre-filters supplied by Full Support Healthcare Ltd. Using any other filters will invalidate your warranty and could be a serious risk to your health. Your respiratory device comes pre-fitted with a genuine Easiair TH3 PR SL filter and pre-filter as standard.
- Page 10 EASIAIR ® 7.4 Hose The Easiair 2020 air hose can be used either way round to ® avoid user error. Disposable hose covers are available to speed up the cleaning process. • Sheathe the hose in an Easiair hose cover (if using). ®...
-
Page 11: Cleaning & Maintenance
EASIAIR ® 8. CLEANING & MAINTENANCE This guide should be used in conjunction with your organisation’s Health & Safety policy. Suitable PPE should be worn during the decontamination procedure, depending on the substances used and your Health & Safety policies. It is recommended that the blower unit, belt, filter housing, hose and headpiece be cleaned after each use to reduce the risk of cross-contamination. - Page 12 EASIAIR ® Maintenance You should inspect your equipment regularly and keep records, to ensure continued optimal use. The following table can be used to track maintenance of your device. Serial Number: Date Commissioned: Maintenance Date of Fit for use? Name and Signature required? Action Cleanliness...
-
Page 13: Fault Finding
EASIAIR ® 9. FAULT FINDING Please see section 6.1-6.4 for fault testing. If a fault warning occurs whilst using your Easiair 2020 Powered Air Kit, please consult the table below: ® Fault Probable reason Recommendation Entirely discharged battery Charge the battery (verify if the blower unit works with The blower unit (if problem persists, check the battery). -
Page 14: Storage
EASIAIR ® 10. STORAGE When not in use, all components should be stored in the container provided. Your Easiair 2020 Powered Air Kit ® should be stored out of direct sunlight, not in contact with solvents or liquids, and away from heavy items. Do not store outside the temperature range of +0°C to +40°C or above humidity levels of 75%RH. -
Page 15: Warranty
2020 battery is guaranteed for a period of on 12 months from the date of manufacture. ® Full Support Healthcare Ltd undertake to exchange or repair, without charge, any part found to be defective within this period. This guarantee does not affect your legal rights, does not cover normal wear and tear, and is subject to the device having: •... - Page 16 THE RPE EXPERTS Full Support Healthcare Ltd Harrowden Court, 66-80 Huxley Close Wellingborough, Northamptonshire NN8 6AB United Kingdom Telephone: +44 (0)1933 672180 www.fullsupportgroup.com EU declaration of comformity present on the website: www.fullsupportgroup.com/DoC IM/1 042020...
Need help?
Do you have a question about the EASIAIR 2020 and is the answer not in the manual?
Questions and answers