Defects Finding Guide /7 - Beko CM 205 Instructions Of Use

EN
Defects finding guide
The appliance does not work.
There is a power failure.

The plug of the supply cord is not inserted

well into the socket.
 The fuse is blown.
The thermostat is in „OFF" position.

The temperatures are not low enough (red
LED on).
The food prevents the door closing.

The appliance was not placed correctly.

The appliance is placed too close to a heat

source.
The thermostat knob is not in the correct

position.
Excessive ice build-up in freezer mode.
The door was not closed properly.

The inside lighting does not work
The lamp is blown. Call your Authorised
Service.
The following are not defects.
Possible noddings and cracks coming from

the product: circulation of the refrigerant in the
system.
The symbol
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
on the product or on packaging indicates that this product may not be
Noises during operation
In order to keep the temperature at the value
you have adjusted, the compressor of the
appliance starts periodically.
The noises which can be heard in such
situation are normal.
They are reduced as soon as the appliance
reaches the operation temperature.
The humming noise is made by the
compressor. It can become a little stronger
when the compressor starts.
The bubbling and gurgling noises coming from
the refrigerant circulating in the pipes of the
appliance, are normal operating noises.
Warning!
Never try to repair yourself the appliance or its
electric components. Any repair made by an
unauthorised person is dangerous for the user
and can result in the warranty cancellation.
7
Instruction for use