Before Use; Intended Use; Fitting Instructions - aidapt VP103 Fitting And Maintenance Instructions

INTRODUCTION
Thank you for deciding to purchase the Tri-Walker Basket from Aidapt. The Aidapt
Tri-Walker Basket is manufactured from the finest materials available. When used
correctly it is designed to give many years of reliable, trouble-free service.
NB. This equipment must be installed by a competent person.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The Aidapt Tri-Walker Basket has been designed to fit neatly to the Aidapt range of
Tri-Walkers and provide hands-free storage for Tri-Walker users.

FITTING INSTRUCTIONS

1. The Aidapt Tri-Walker Basket attaches to the front of the Tri-Walker.
2. If they are not already in position, slip the grey plastic basket ring fitting
over the height adjustable metal tube attached to the handle and slot the
handle into the frame.
3. At the top rear of the basket are integrated hooks, theseare simply slotted
into the integrated hanging loop on the basket ring fitting (see Fig. 1).
4. The underside of the Basket features a slot across the width of the Basket,
which allows the basket to fit over the central locking mechanism between
the front bars.
Fitting and Maintenance Instructions
Fig. 1
2
Ver. 2 08/2012 (2215)