Ram Expansion - Brother HL-7050 Series User Manual

RAM expansion

The HL-7050 and HL-7050N printer have 32 MB of standard memory
and two slots for optional memory expansion. You can expand the
memory up to 288 MB by installing dual in-line memory modules
(DIMMs). (The standard memory varies depending on the printer
model and country.)
You can install the following DIMMs:
<US>
16 MB Techworks
32 MB Techworks
64 MB Techworks
128 MB Techworks
For more information, visit Techworks website at
www.techworks.com
<Europe>
16 MB Buffalo Technology
32 MB Buffalo Technology
64 MB Buffalo Technology
128 MB Buffalo Technology
In general, the DIMM must have the following specifications:
Type:
CAS lantency:
Clock frequency:
Capacity:
Height:
Parity:
Dram Type:
SDRAM can be used.
For more information, call the dealer you bought the printer
from.
For the latest information and drivers, visit the Brother
Solutions Center at http://solutions.brother.com
12456-0001
12457-0001
12458-0001
12459-0001
12323-0001
12324-0001
12325-0001
12326-0001
100 pin and 32 bit output
2 or 3
66 MHz or more
16, 32, 64 or 128 MB
46 mm (1.8 in.) or less
NONE
SDRAM 4 Bank
OPTIONS 4 - 13