INTERTECHNO TK-200 Operating Instructions Manual page 20

GB
Operating instructions
ITK-200
Replacing the battery: Fig. 3
To open, insert a flat-head screwdriver into the slot (3/a).
Using a little force, lift the screwdriver and pop open the
front case.
Insert the screwdriver into the slot (Fig. 3/b) and push the
battery out.
Insert a new 3 V CR 2032, making sure that the + symbol is
facing up (Fig. 3/c).
Fit the buttons into the front case and push both halves
together to close (Fig. 3/d).
LITHIUM BATTERY CAUTION: There is a risk of explosion if
the replacement battery is the incorrect type.
Dispose of used batteries in accordance with environmental
regulations.
The declaration of conformity can be found at
www.intertechno.at/CE