Load Paper In The Paper Tray - Brother HL-7050 series Quick Setup Manual

3

Load Paper in the Paper Tray

1
Pull the paper tray completely out of the
printer.
Paper tray
2
Remove the protective part from inside the
paper tray.
Protective part
3
While pressing the paper guide release lever,
slide the adjusters to fit the paper size.
Check that they fit correctly into the slots.
Adjuster
For Legal size paper, press the
universal guide release button and pull
out the rear of the paper tray.
Paper guide
release
lever
Universal guide
release lever
4
Fan the stack of paper well to avoid paper
jams and misfeeds.
5
Load paper into the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
6
Put the paper tray back into the printer.
Go to the next page
Up to here.
7