Setting Your Language On The Control Panel - Brother HL-53 Quick Setup Manual

4
Print a test page
IMPORTANT
DO NOT connect the interface cable yet.
a
Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
b
Turn on the printer power switch.
c
Unfold support flap1.
d
After the printer has finished warming up, the
LCD shows READY.
e
Press Go. The printer prints a test page. Check
that the test page has printed correctly.
Note
This function will not be available after the first
print job you send from your computer.
5
Setting your language on
the control panel
a
Press + until the LCD shows SETUP.Press
Set.
SETUP
b
Press Set again.
LANGUAGE
c
Press + or – to choose your language. Press
Set to accept.
=ENGLISH
Now go to
Go to the next page to install the printer driver.
5