SENDO SV663 Manual page 39

Table of Contents

Advertisement

To change your front cover
1
Remove the battery cover as described
above.
2
Remove the battery - press down on the
tab at the centre of the bottom edge of the
battery and lift out.
3
Pull on the two tabs near the bottom of the
phone at the same time, and press down.
The bottom of the cover should now stand
clear of the phone slightly.
4
Gently but firmly pull the bottom of the
cover away from the phone, as illustrated
below.
5
Separate the front cover, keypad and
phone and place the keypad into the new
cover.
>
Note:
If you want to clean the inside of
your cover, use a clean, soft, dry cloth.
You should carefully blow off any
remaining dust before replacing the
cover.
6
To replace the front cover, place the top of
the cover onto the phone and then press
the bottom of the cover and the phone
together (making sure the two tabs at the
bottom of the cover are aligned correctly
with the holes on the phone - the cover
should click into place).
7
Insert the battery into the phone, starting
with the top edge first. Align the tabs on
the edge of the battery with the tabs on the
back of the phone. Make sure the gold-
[[[
]]]
33
7

Advertisement

Table of Contents
loading

Table of Contents