Page 1
Q8 Firmware Update Guide Copyright (C) 2021 ZOOM Corporation. All Rights Reserved. ● ZOOM Corporation will bear no responsibility for any losses or third-party claims resulting from the use of this software. Moreover, distribution, sale, leasing, rental, alteration, and reverse engineering without permission of this software are prohibited.
Page 2
This guide explains updating the firmware to version 1.10 as an example. Download the firmware update file. Download the ZIP file that contains the firmware update file from the Q8 download page.
Page 3
On Windows Select the folder that contains the downloaded ZIP file. Click ① “Compressed Folder Tools” followed by ② “Extract Extract the ZIP file. all”. This extracts the ZIP file. ① ① ②...
Page 4
Copy the firmware update file to a SD card. Copy the “Q8_110.BIN” file to a SD card. Firmware update file Copy the firmware update file to a SD card.
Page 5
On macOS After downloading, open the ① “Downloads” folder, which appears at the right end of the Dock by default. Extract the file. Then, click ②. Downloaded files will be shown. ② ① Copy the firmware update file to a SD card. Copy the “Q8_110.BIN”...
Page 6
The following procedures are the same on both Windows and macOS. Install the fully charged batterie in the Q8 or connect a USB power source. NOTE Executing a firmware update is not possible if the remaining battery power is low.
Page 7
Tap “Yes”. After updating, the Completion Screen opens. NOTE During the firmware update, do not turn the power off or remove the SD card. After updating, press and hold to turn the power off. NOTE In the unlikely event that a firmware update should fail while in progress, conduct the procedures from the beginning to update the firmware again.