Brother HL-5240 User Manual page 89

Error message
Dust On Drum
Memory Full
Print Overrun
Service Call Error
Action
See Cleaning the corona wire on page 77.
Press Go to print the remaining data in the printer memory. Cancel the print job
if you want to delete the remaining data in the printer memory. See Control panel
buttons on page 51.
Reduce the complexity of your document or cut the print resolution.
Add more memory. See Installing extra memory on page 58.
Press Go to print the remaining data in the printer memory. Cancel the print job
if you want to delete the remaining data in the printer memory. See Control panel
buttons on page 51.
If this does not clear the error, reduce the complexity of your document or cut the
print resolution.
Add more memory. See Installing extra memory on page 58.
Set page protection to AUTO by using the supplied Windows
Printer Console program.
Change the following settings in the supplied Windows
best combination of these settings will vary depending on your document:
• Graphics mode
• TrueType mode
• Use Printer TrueType
Check the LED indication to identify the error. See Service call indications on
page 49.
®
Fonts
7. Troubleshooting
®
driver or Remote
®
driver and try again. The
81