Martin AW6S7246AX User Manual page 8

8
Make sure that the plastic
guide cannot move when the
appliance drains and the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
4. To a stand pipe with vent hole - Insert
the drain hose directly into a drain pipe.
Refer to the illustration.
The end of the drain hose must
always be ventilated , i.e. the
inner diameter of the drain pipe
(min. 38 mm - min. 1.5") must
be larger than the external
diameter of the drain hose.
5. Without the plastic hose guide, to a sink
spigot- Put the drain hose in the spigot
and tighten it with a clamp. Refer to the
illustration.
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
1
ø16
2
W011
Connect the drain hose to the spigot and
tighten it with a clamp. Make sure that the
drain hose makes a loop to prevent
particles going into the appliance from the
sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and tighten it
with a clamp.