Brother HL-5130 User Manual page 26

Make sure that the paper is straight and in the proper position in the manual feed tray. If it is not,
the paper may not be fed properly, resulting in a skewed printout or a paper jam.
Do not put more than one piece of paper in the manual feed tray at the same time, or it may
cause a jam.
If you put any Media (paper, transparency and so on) in the manual feed tray before the printer
is in the Ready state, the media may be ejected without being printed on.
6
After the printed page comes out of the printer, put in the next sheet of paper as in Step 5 above.
Repeat for each page that you want to print.
7
Close the face-up output tray.
Caution
Remove each sheet immediately after printing. Stacking the sheets may cause a paper jam or the
paper to curl.
1 - 19 ABOUT THIS PRINTER
Figure 1-21