Advertisement
Installing Discoverer and NatureView Spotting Scope On Camera
What You Will Need
• Discoverer (781600) or NatureView (781645) Spotting Scope
• Discoverer Telephoto Adapter (223030)
• Camera Body Adapter (200003, 200004, 200005, 200007, 200010 or
200051)
• 35mm Camera with interchangeable lens
• Hex head or screwdriver
How to Install
Turning counter-clockwise, remove the ocular dust cap from the spotting scope
(781600 or 781645).
With your fingertips, grip the rubber eye guard and turning clockwise, fully extend
the eyepiece.
Setting the female end of the Discoverer Telephoto Adapter (223030) on the
eyepiece end of the spotting scope, turn clockwise until snug.
Following manufacture instructions, remove the camera lens from the camera
body.
Advertisement
Table of Contents
Related Manuals for Bushnell Discoverer 78-1600
Summary of Contents for Bushnell Discoverer 78-1600
- Page 1 Installing Discoverer and NatureView Spotting Scope On Camera What You Will Need • Discoverer (781600) or NatureView (781645) Spotting Scope • Discoverer Telephoto Adapter (223030) • Camera Body Adapter (200003, 200004, 200005, 200007, 200010 or 200051) • 35mm Camera with interchangeable lens •...
- Page 2 Align the red dot of the appropriate Camera Body Adapter to the red dot on the camera housing and turn clockwise until snug. Attach Telephoto Adapter (that is attached to spotting scope) to Camera Body Adapter (this is attached to camera housing) by screwing in clockwise until snug. When tightened, if the tripod-mounting plate is not on the same side as the bottom of the camera for landscape photos or side of the camera for portrait pictures, adjustments can me made.
Need help?
Do you have a question about the Discoverer 78-1600 and is the answer not in the manual?
Questions and answers