Bushnell 11-0013G Instruction Manual page 9

Inside the Mode Menu-Groups/Items/Settings
Group Item Settings
Cloudy
Tungsten
Fluorescent
Color Color
Mode
Black & White
Sepia
Contrast Hi
Normal
Low
3: Set All Reset No / Yes
No / Yes
Format
12
continued
Description
Manual setting for outdoor overcast or shade conditions
Manual setting for indoor tungsten (light bulb) lighting
Manual setting for indoor fluorescent lighting
Normal color reproduction
For black and white only photography
Special effect for "antique" toned photo look
Enhanced contrast for overcast days or flat lighting
Average contrast for most scenes
Reduced contrast for mid-day or other high contrast conditions
Select "Yes" and press "OK/Menu" button to erase all user settings
and restore default settings
Select "Yes" , then press the "OK" button to format (prepare) an
inserted (optional) SD card. Caution: this will erase all previouly
stored files on the card.
Inside the Mode Menu-Groups/Items/Settings
Group Item Settings
3: Set Language English/Spanish/
French/Deutsch/Ital-
ian/Portuguese
Rec View Off, 1, 2, or 3 Sec.
File Name Reset or Series
LCD Set to any of 7 levels
Brightness
Date & > to go to setup. Press
Time "OK" once set.
Video Out NTSC or PAL
Rec Mode 1-Shot or 3-Shot
Storage Auto
SD Card
Internal
continued
Description
Selects the language displayed in all menus
Sets duration of photo review display after a photo is taken
File numbering for new photos after deleting all starts over at
"1" (Reset), or continues to advance from last # used (Series)
Sets display brightness. Left box=dimmer, Right box=brighter.
Middle box is normal level. Press OK to set.
Left/right keys move between fields. Up/down keys change
setting. Letter at end of date sets format: M, D, or Y first.
Affects video out signal. Set for your location's TV system.
Sets number of photos taken each time shutter release is
pressed. 1-shot is normal single shot, 3-shot will take 3 photos
in a rapid series to capture an action sequence.
Files are stored on SD card if inserted, internal RAM if not
Files are stored on the SD card only (must be inserted)
Files are stored in internal memory only, never on card
13