Table of Contents
Advertisement
Ø SAFETY INFORMATION.......................................................................... PAGE 1
Ø ADDITIONAL SAFETY INFORMATION.................................................... PAGE 1
Ø IMPORTANT INFORMATION................................................................... PAGE 2
Ø SPECIFICATIONS.................................................................................... PAGE 3
Ø BEFORE USING....................................................................................... PAGE 3
Ø OPERATION INSTRUCTIONS................................................................. PAGE 4
Ø STORAGE................................................................................................. PAGE 5
Ø EXPLODED DIAGRAM............................................................................. PAGE 5
Ø PARTS LIST.............................................................................................. PAGE 6
Ø LIMITED WARRANTY............................................................................... PAGE 7
FOR YOUR SAFETY, BEFORE USING STAND, READ, UNDERSTAND, AND FOLLOW THE
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS IN THIS MANUAL.
THIS EQUIPMENT MUST BE OPERATED & REPAIRED BY QUALIFIED PERSONNEL. FAILURE
TO COMPLY COULD RESULT IN DEATH, BODILY INJURY AND/OR DAMAGE TO EQUIPMENT.
·
Study, understand, and follow all Instructions before operating this device.
·
Use a minimum of four Stands to support and stabilize a vehicle, and a minimum of two
additional Stands for each additional axle assembly, before starting repairs.
·
Do not exceed rated capacity.
·
Use only on a hard, level surface.
·
The vehicle shall be raised only once to place vehicle support Stands under the entire vehicle.
·
Ensure Stands are stable and vehicle is balanced before lowering the vehicle onto Stands.
·
Locate saddles at vehicle manufacturer's designated support points.
·
Carefully lower the vehicle onto all Stands simultaneously.
·
Center load on saddles.
·
Do not apply horizontal forces or large torque loads to vehicle while the vehicle is support on
Stands.
·
Do not start engine while the vehicle is support on Stands.
·
Failure to heed these markings may result in personal injury and/or property damage.
·
Only attachments, restraints, or adapters supplied by the manufacturer shall be used.
·
No alternations shall be made to this product.
Index
Safety Information
Additional Safety Information
MSC-STAND18X
1
July 2018
Advertisement
Table of Contents
