IDEAL MSC-STAND18X Installation, Operation & Maintenance Manual

IDEAL MSC-STAND18X Installation, Operation & Maintenance Manual

High rise stand capacity 18,000 lbs.

Advertisement

Quick Links

High Rise Stand
MSC-STAND18X
Capacity 18,000 lbs.
Installation, Operation & Maintenance
Manual
July 2018

Advertisement

Table of Contents
loading

Summary of Contents for IDEAL MSC-STAND18X

  • Page 1 High Rise Stand MSC-STAND18X Capacity 18,000 lbs. Installation, Operation & Maintenance Manual July 2018...
  • Page 2: Table Of Contents

    Failure to heed these markings may result in personal injury and/or property damage. Additional Safety Information · Only attachments, restraints, or adapters supplied by the manufacturer shall be used. · No alternations shall be made to this product. MSC-STAND18X July 2018...
  • Page 3: Ø Important Information

    ONLY attachments and adapters supplied by or approved by the manufacturer shall be used. · It shall be the responsibility of the employer to ensure that applicable personal protective equipment (PPE) complies with applicable local safety codes. Safety Labels & Product ID Information MSC-STAND18X July 2018...
  • Page 4: Ø Specifications

    Specifications Item No. Capacity Min. Height Max. Height Net Weight MSC-STAND18X 18,000 lbs. 48-5/8” 69-7/8” 167 lbs. Before Using 1. Verify that the product and the application are compatible. 2. Inspect Stands before each use. Do not use if there are bent, broken or cracked components noted (including labels).
  • Page 5: Ø Operation Instructions

    Be sure that all tools and personnel are clear before lowering load. 1. With suitable lift, raise vehicle clear of Stands. 2. Carefully release support pin and adjust extension tube to lowest position. 3. Carefully remove Stands, then lower vehicle with lift device. MSC-STAND18X July 2018...
  • Page 6: Ø Maintenance & Inspection

    2. Because of the potential hazards associated with the misuse of equipment of this type, no modifications should be made of the product without consent from manufacturer. Storage 1. Always store Stands in the upright position and in a clean and dry area to help prevent rust. Exploded Diagram MSC-STAND18X July 2018...
  • Page 7: Ø Parts List

    5404-04028-000 Split Pin ZJ14-00001-000 ZJ14-02000-000 Joint Lever ZJ06-00001-000 Spring ZJ06-05000-000 Caster ZJ14-00003-000 SJ01-00033-000 Split Pin For Parts & Service Assistance Please contact iDEAL Automotive Equipment @ Toll Free: 877-588-9337 ALWAYS REPLACE WORN PARTS WITH GENUINE, AUTHORIZED PARTS. MSC-STAND18X July 2018...
  • Page 8: Ø Limited Warranty

    8320 E Hwy 67, Alvarado, TX 76009 MSC-STAND18X July 2018...

Table of Contents