Advertisement
Plastic Controller Holder: Convenient acrylic plastic securely holds the
4
controller by sliding in the rear and gently pulling back the 2 front clips, one by
one to lock in the controller. On the left side is the handpiece holder which can
be adjusted by the Phillips screw to angle upward if resting on the table or
desktop. Bottom plastic clip can fit over a belt or pants.
Forward/Reverse: Change speed direction by pressing the F/R button on the
5
left side.
Connect the A/C Charger adapter to charge or to use A/C power by plugging
6
in the proper adapter on the right side.
HANDPIECES
Mystisa 2
Slim Type
Only 16mm in diameter is now our smallest and thinnest handpiece designed for
comfort. Available for 3/32" chuck type only.
Twist the knurled ring counter clockwise to conveniently change bits.
Mystisa 2
Lab Type
18mm diameter with heavy-duty front-end bearings for extended working hours.
Turn the knurled ring ¼ turn clockwise to conveniently change bits.
Available for either 3/32" chuck type or 1/8" chuck type.
Mystisa 2
E-Type
HOLDER
4
LEFT
5
2
RIGHT
Allows for versatility to
connect standard e-type
handpieces which can
also be autoclaved for
intraoral use
6
Advertisement
