Answers To Commonly Asked Questions; Troubleshooting Guide - Bushnell Voyager 78-9440 User Manual

1. The image I see in the telescope is upside
down?
2. How do I determine the power my telescope?
3. Where do I find the Telescope Focal Length?
4. What can I see with my telescope?
5. What do the numbers on the eyepiece mean?
If after you have set-up your new telescope you are unable to see any objects, use this Quick
Reference guide to help you to understand the cause of the problem and quickly determine a remedy
1. I've completed the set-up yet I cannot see
anything.

ANSWERS TO COMMONLY ASKED QUESTIONS

TROUBLESHOOTING GUIDE

An upside-down image
characteristic of most astronomical telescopes.
However, as described above, the Erecting
Eyepiece will provide erect images allowing
objects that you see to be right-side-up.
The power of your telescope can be determined
by dividing the focal length of the objective lens
by the focal length of the eyepiece. The
eyepiece focal length is the number printed on
the eyepiece. (For example: 1000
The telescope focal length is the same focal
length as the objective focal length. For this
telescope it is 700mm. Telescope focal lengths
range from 600mm to 910mm on Bushnell
telescopes.
Telescopes with power ranging from 25X to 50X
can be used to view Star Clusters and Nebulae.
90X to 120X telescopes can view galaxies. Most
planets can be seen at 150X and higher.
The numbers on the eyepiece represents the
"focal Length" of the eyepiece.
Check to see if objective lens cover has been
removed.
Try to view an object that is 200 or more yards
away.
If there is more than one eyepiece included with
the telescope, use the lowest power (highest
number) eyepiece to begin viewing.
Use the
Rack & Pinion Focusing Mechanism (3)
to bring the object you are trying to view into
focus
is a common
25 = 40X)