Advertisement
GLOVEBOX
CARE & MAINTENANCE
LAMINATE
For general cleaning use a soft clean cloth and a mild detergent in warm
water. Wipe the surface gently to remove dust or marks. Always rinse after
cleaning with fresh water to remove any remaining detergent. For heavier
stains use a non-abrasive cleaner. Excessive scrubbing may damage the
decorative surface, particularly a gloss finish.
METAL
For general cleaning use a soft clean cloth and a mild detergent in warm
water. Wipe the surface gently to remove dust or marks. Always rinse after
cleaning with fresh water to remove any remaining detergent.
POWDER COAT
Remove loose deposits with a wet sponge (avoid scratching the surface by
dry dusting). Use a soft clean cloth and mild detergent in warm water. Wipe
the powdercoating to remove dust, salt or other deposits. Always rinse
after cleaning with fresh water to remove any remaining detergent. In some
cases, strong solvents recommended for thinning various types of paints and
also for cleaning up are harmful to the extended life of the powder coated
surface. These solvents should not be used for cleaning purposes.
SOLID TIMBER
Avoid direct sunlight.
Don't scrub the surface with an abrasive cloth as this can damage the
timber and the finish. Dust and wipe down the timber surface regularly with
a slightly damp soft cloth.
VENEER
Dust and wipe down the veneer surface regularly with a slightly damp soft
cloth. Furniture polish recommended for the appropriate wood finish will
remove soil and dust and provide a protective coating to guard against
future spills. Polishing more than 3-4 times per year will see a buildup of
cloudy film. Water or liquid spills should be wiped up immediately and
avoid placing hot items directly on the veneer surface.
FABRIC
Gently spot clean excess liquid from the fabric surface. Do not saturate or
scrub the fabric with water or cleaning liquids. Every fabric composition
varies and the individual fabric supplier should be contacted for further
fabric care instructions.
ECHOPANEL
Remove dust and marks with a soft damp cloth and mild solutions of
warm water and upholstery shampoo. Blot dry with a solution free soft
damp cloth.
PLASTIC
Use a damp cloth and mild cleaning product. Dry with a soft cloth. Do not
use abrasive cleaning agents or cloths.
WHITEBOARD
Use a whiteboard duster for general erasing. For tough marks (ghosting)
use a professional whiteboard cleaner and wipe with soap, water and a
clean cloth afterwards. To prevent ghosting, the ink should be completely
dry before erasing. Excessive smearing and smudging can occur if wet ink
is attempted to be erased.
zenithinteriors.com
Advertisement
