Summary of Contents for C.A. Technologies CAT-Xpress
Page 1
CAT-Xpress PRESSURE FEED SPRAY GUN PRODUCT INFORMATION The CAT-Xpress spray gun offers both a pressure reduced air cap (2403218 &2403224) and HVLP air cap (2403233 & 2403235) for areas requiring HVLP compliance. 2403218 & 2403224 - Consumes 9 cfm at 29 psi gun inlet - Pressure reduced - 2403218 - can be used with 0.8 mm - 1.8 mm orifices...
Page 2
Operation and Maintenance Instructions for CAT-Xpress Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”.
Page 3
Item Item Part no. Description Part no. Description 2400154 Air Cap Ring 98-5125 O-Ring V2070005300 Air Cap Sealing Ring 2396036 Air Valve Stem Cap V2070005200 O-Ring 60-1371 Air Valve Stem See Air Cap Chart (Pg1) Air Cap 61-1032 Air Valve Poppet 2394821 Nozzle Body 61-1003...
Page 4
Fluid nozzle / Air cap selection charts CAT-Xpress Series - Pressure Feed Guns CAT-Xpress HVLP/Pressure reduced spray gun Material type Fluid orifice x Air cap Maximum pattern width Very Thin less than 16 sec. Zahn #2 0.8 mm x 2403218 or 2403233 2403218 13”...