Table of Contents
Advertisement
The Remote Extender
The Remote Extender provides a USB 3.2 Gen 1 Type-C port for standard USB devices and allows you to connect one
USB device directly.
ITEM
TYPE
1
Power LED
2
Link LED
3
Device Port
4
Link Port (ARJ45)
5
Mode
6
Config
note
* Guaranteed sufficient power via USB Bus power requires a USB-C connection to a USB-C power upstream capable of 5V
3A configuration. When using a USB-A to USB-C or similar legacy connection, LED will be AMBER. It is recommended in
situations where the LED is AMBER that sufficient testing be performed to guarantee system stability.
Front View
1
Rear View
Link
4
DESCRIPTION
LED Is SOLID GREEN when sufficient power is supplied by Local Extender.
LED is SOLID AMBER when less than optimal power is not guaranteed by host.
LED is SOLID GREEN ON when Remote Extender is linked to an opposite Local
Extender. LED is OFF or BLINKING when there is no connection between the
Local Extender and Remote Extender units.
USB 3 Type-C receptacle used to connect Remote Extender to USB device.
Accepts custom ARJ45 Cable included with product.
Reserved for manufacturer use.
Reserved for manufacturer use.
6
Link
Device
2
3
Mode
Config
5
6
Advertisement
Table of Contents
