Table of Contents
Advertisement
The Local Extender
The Local Extender connects to the computer using a standard USB 3.2 Gen 1 cable. Power is provided by the USB
Host/Hub or optional DC input.
ITEM
TYPE
1
DC Power Port
2
Power LED *
Refer to note below
3
Link LED
4
USB Host Port
5
Link Port (ARJ45)
6
Mode
7
Config
note
* Guaranteed sufficient power via USB Bus power requires a USB-C connection to a USB-C power upstream capable of 5V
3A configuration. When using a USB-A to USB-C or similar legacy connection, LED will be AMBER. It is recommended in
situations where the LED is AMBER that sufficient testing be performed to guarantee system stability.
Front View
5V DC
1
Rear View
Link
5
DESCRIPTION
Optional DC power input, accepts 5V 3A. (Sold separately)
5V 3A Power Supply (LVL VI) 1.7mm ID (Ref PN 21-00111)
LED Is SOLID GREEN When sufficient power is provided by host. LED is SOLID
AMBER when less than optimal power is not guaranteed by host.
LED is SOLID GREEN ON when Local Extender is linked to an opposite Remote
Extender. LED is OFF or BLINKING when there is no connection between the Local
Extender and Remote Extender units.
USB 3 Type-C receptacle used to connect Local Extender to USB 3 Host computer.
Accepts custom ARJ45 Cable included with product.
Reserved for manufacturer use.
Reserved for manufacturer use.
Link
Host
2
3
4
Mode
Config
6
7
5
Advertisement
Table of Contents
