Advertisement
User Manual
Using Your Toaster
The unit has two controls .
1.
Speed/color control
Determines the length of time the toast or product is in the heating chamber .
The slower the speed, the longer the exposure and the darker the product .
2.
Heat control switch has 4 settings.
"OFF" - In this position, the unit is off .
"STANDBY" - In this position, the conveyor belt will run and both top and bottom
elements will operate at 25% capacity . This mode is designed to keep the unit warm
in quiet periods to reduce start-up time and conserve energy .
"BREAD" - In this position, both top and bottom elements operate at full capacity .
This is the ideal mode for toasting bread .
"BUNS" - In this position, only the top element operates at full capacity .
This is the ideal setting for toasting one side only of a bun .
Cleaning & Maintenance
CAUTION: THIS APPLIANCE SHOULD NOT BE IMMERSED IN WATER.
USE ONLY A DAMP CLOTH OR SPONGE DIPPED IN SOAPY WATER.
DO NOT USE STEEL WOOL AS IT WILL DAMAGE THE BRIGHT STAINLESS STEEL FINISH.
EXTERIOR & CRUMB TRAY
1 .
Unplug the power cord from the wall outlet .
2 .
Wait for the oven to cool .
3 .
Wipe off the unit with a dry cloth and wait at least half an hour before reconnecting
to the power outlet .
4 .
Remove the crumb tray from the unit by pulling forward . Dispose of the crumbs and clean the
tray with a damp cloth or sponge dipped in soapy water . Refit the tray before reusing the unit .
CONVEYOR BELT
1 .
Turn off the toaster and allow the unit to cool down .
2 .
Turn the unit on and set to Standby Mode, adjust the belt to slow speed .
3 .
Using an abrasive pad, wipe the conveyor belt in a back and forth motion
(ie: side to side) to remove baked-on product .
4 .
Finally, clean the belt with a damp cloth in the same manner described in number 3 .
SUGGESTED CLEANER
Noble Chemical QuikSan Food Contact & Surface Sanitizer
- 6 -
Advertisement
