Advertisement
ASSEMBLY
1. Lie out and connect two of the Legs (A) with one of the Short Leg Braces (B). All the legs are identical so they can be used in every position (Fig 1).
Fig. 1
Fig. 1
2. Install two of the smaller 8mm nuts and bolts through each of the Legs (A) and Short Leg Braces (B). Do not tighten the bolts at this time.
Assemble the entire table with the nuts only fi nger tight and after assembly wrench tighten each of the nuts securely (Figs 2, 3).
Fig. 2
Fig. 2
To order parts and supplies: 800.345.1178 >> eastwood.com
Fig. 3
Fig. 3
3
Advertisement
