Table of Contents
Advertisement
Component Identification
1. Inlet Filter: Filter that will prevent particles and debris from entering the pump. Clean regularly.
2. On/Off Switch: Toggle switches that will power or shut down unit.
3. High Pressure Outlet: Connect your high pressure hose.
4. Trigger: Actuate to allow pressurized water to flow out of spray gun.
5. Unloader: Pressure Adjustment valve that regulates pressure and directs flow into bypass when
trigger is closed.
6. Motor: Motor provides years of reliable use and powers the pump.
7. Pump: A device that moves fluid through a combination of suction and displacement.
8. Spray Gun: Always use two hands for safe operation.
9. Chemical Strainer: Must be fully submerged in cleaning chemical to draw fluid.
10. Chemical Hose: Submerge in cleaning solution.
11. Pressure Hose: Attach to gun and water outlet.
12. Hose and Gun Bracket: Attaches on another surface suitable for storing the pressure hose.
13. Chemical Injector: Inject chemicals into a system at the required pressure for the system
14. Total Start / Stop Switch: Automatically shuts motor off when not spraying.
See "Parts Explosion" for more details
6
Advertisement
Table of Contents
