Advertisement
Quick Links
10 MIN
6935 Reames Rd. Ste. K. Charlotte, NC 28216
@
support@zippity-outdoor.com
704-892-5222 / 877-234-6196
zippity-outdoor.com
Ver. 072320
This post is designed to be used with our Newport Vinyl Picket
Fence (ZP19002) and Newport Vinyl Picket Gate (ZP19004).
33 1/2 in
NEWPORT VINYL FINISHING
POST (36" HIGH) WITH NO-DIG
STEEL PIPE ANCHOR KIT
Approximate assembly
time
ASSEMBLY
INSTRUCTIONS
36 in
22 7/8 in
4 in
24 in
Want to see a video on how to
assemble this product? Scan
www.zippity-outdoor.com
Ground
the code below!
1
Advertisement
Related Manuals for Zippity ZP19002
Summary of Contents for Zippity ZP19002
- Page 1 ASSEMBLY INSTRUCTIONS This post is designed to be used with our Newport Vinyl Picket Fence (ZP19002) and Newport Vinyl Picket Gate (ZP19004). 33 1/2 in 36 in 22 7/8 in 4 in Ground 24 in NEWPORT VINYL FINISHING POST (36” HIGH) WITH NO-DIG...
- Page 2 WEBSITE: nychgroup.com/parts EMAIL: support@zippity-outdoor.com PHONE: 704-892-5222 / 877-234-6196 Customer service agents are available to take calls weekdays from 8am-5pm EST. If you call outside of business hours, please leave a voicemail.
- Page 3 BEST GOOD BETTER DO NOT USE Post Pounder 10lb Sledgehammer 5lb Sledgehammer Hammer Purchase a post pounder at any hardware store, or go to www.wambamfence.com. Post pounders cost roughly $25 to $30 at hardware stores. www.zippity-outdoor.com...
- Page 4 This can be done either during the installation of the pipe anchor or even after the fence is complete. 6935 Reames Rd. Ste. K. Charlotte, NC 28216 support@zippity-outdoor.com 704-892-5222 / 877-234-6196 zippity-outdoor.com...