Power Brush - Aiwa AM-SVO314GR Instruction Manual

POWER BRUSH

Carry out maintenance if any waste threads or hair gets tangled in the
brush. Press the Power Brush Release Button to detach the power brush
from the upright unit.
Maintenance when the power brush cannot be manually rotated
1. Unscrew the left hand side and
then lift and dislodge the brush
cover.
3. Take out the rotating brush and
then remove the blockage and
waste.
Regular Maintenance
Slowly rotate the brush manually and
remove any foreign objects tangled
around the brush.
Take out
around
the brush.
12
2. Lift up the left side of the
rotating brush and then
remove the belt pulley from
the belt.
B e lt
4. Re-install the rotating brush
again. Finally, check if the brush
cover is securely fixed and the
rotating brush rotates properly.