Maintenance & Cleaning - Aiwa AM-SVO314GR Instruction Manual

MAINTENANCE / CLEANING
• Dirt in the dust container should be emptied after each use.
• Always switch off the vacuum cleaner before cleaning.
1. Hold the vacuum cleaner vertically
with the air-intake (nozzle end)
pointing downwards to avoid
spillage. Press the release button
on the top of the vacuum cleaner
and release the dust container over
a rubbish bin and remove the filter
bracket from the dust container.
3. Empty the contents of the dust
container into the rubbish bin.
5. Fit the inner and outer filters by
turning the handle upwards back
into the dust container. Make sure
you have dried the inside of the
dust container.
Caution:
• Do not vacuum up large objects such as tissue papers. This will cause a
blockage and lower the suction power .
• Never vacuum up flammable substances and do not vacuum up ashes
until they are cold.
• Always dispose of the dust and clean the filter frequently, otherwise the
dust will damage the motor.
2. Remove the filters by turning
the handle downwards and
pull them out from the dust
container.
4. Remove the filters and wash
by water. Dry it before
re-installing it.
NOTE: Do not clean the vacuum
cleaner with paint thinner or
chemical solutions as this will
damage the vacuum cleaner.
6. Re-install the dust container
11