Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SEO Electronics CANblu
Summary of Contents for SEO Electronics CANblu
- Page 1 SEO CANblu IMMOBILIZER INSTALLER MANUAL v 1.91 280621...
- Page 2 SEO CANi, the CANblu is disarmed by entering a previously set code using the existing buttons in the car (PIN code). In addition to this the SEO CANblu also includes a transceiver channel, the immobilizer is disarmed when the ID transmitter or smartphone stays within its range.
- Page 3 SEO CANblu signal range. The wireless transmitter must appear in range of the SEO CANblu at least once or the PIN code must be set for the immobilizer to block the car The SEO CANblu immobilizer can work with any AVL (Automatic Vehicle Location) device equipped with a control output.
- Page 4 SEO CANblu immobilizer. Disarm the immobilizer by entering the existing PIN code or using paired ID transmitter before programming a new buttons combination. The initial programming (during the installation of the device) does not require disarming, just follow the programming procedure described below.
- Page 5 Updating the software with the O351 programmer device Connect the SEO CANblu device through O351 programmer device to the computer to update the immobilizer database. For this purpose along with the programmer device we also provide the PC software necessary for the update. The programmer device can update the database of supported vehicles.
- Page 6 ID button on the immobilizer’s main unit • Press the ID button once – checking the number of programmed ID transmitters and smartphones to the immobilizer main unit. The number of flashes of the LED indicates the number of programmed devices. •...
- Page 7 Description of vehicle buttons available for PIN code v 1.91 280621...
- Page 8 v 1.91 280621...
- Page 9 • If, within 2 seconds after switching the ignition ON, the ID transmitter or previously paired smarthone is not within the SEO CANblu signal range, a GND will appear on the PIN9 output, • While the ignition is switched ON for more than 2 seconds and there is GND on the PIN9...
- Page 10 v 1.91 280621...
Need help?
Do you have a question about the CANblu and is the answer not in the manual?
Questions and answers