Yamaha YZF-R1 2004 Service Information page 48

NO. ITEM
Sidestand
16
(See page 3-61)
Sidestand switch
17 *
(See page 3-61, 8-4)
Front fork
18 *
(See page 3-53)
Shock absorber
19 * assembly
(See page 3-56, 4-68)
Rear suspension relay
arm and connecting arm
20 *
pivoting points
(See page 4-72)
Electronic fuel injection
21 *
(See page 3-17, 21)
Engine oil
22
(See page 3-26, 28)
Engine oil filter
23 cartridge
(See page 3-28)
Cooling system g y
24 24 * *
(See page 3-37, 38, 39)
Front and rear brake
switches
25 *
(See page 3-45)
(See page 8-4)
Moving parts and cables
26
(See page 3-61)
Throttle grip housing
27 * and cable
(See page 3-22)
Air induction system
28 *
(See page 7-46)
Muffler and exhaust
29 * pipe
(See page 3-35)
EXUP system
30 *
(See page 3–36)
Lights, signals and
31 * switches
(See page 3-70)
NOTE:
D Air filter
S This model's air filter is equipped with a disposable oil-coated paper element, which must not be
cleaned with compressed air to avoid damaging it.
S The air filter element needs to be replaced more frequently when riding in unusually wet dusty
areas.
D Hydraulic brake service
S Regularly check and, if necessary, correct the brake fluid level.
S Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
S Replace the brake hoses every four years and if cracked or damaged.
PERIODIC MAINTENANCE AND
LUBRICATION INTERVALS
CHECK OR MAINTENANCE JOB
S Check operation.
S Lubricate.
S Check operation.
S Check operation and for oil leakage.
S Check operation and shock absorber for oil leakage.
S Check operation.
S Adjust engine idling speed and synchronization.
S Change.
S Check oil level and vehicle for oil leakage.
S Replace.
S Check coolant level and vehicle for coolant leakage.
S Change.
S Check operation.
S Lubricate.
S Check operation and free play.
S Adjust the throttle cable free play if necessary.
S Lubricate the throttle grip housing and cable.
S Check the air cut-off valve, reed valve, and hose for dam-
age
S Replace any damaged parts if necessary.
S Check the screw clamp for looseness.
S Check operation, cable free play and pulley position.
S Check operation.
S Adjust headlight beam.
3-2
43
1
CHK
ADJ
ODOMETER READING
ANNUAL
( 1,000 km)
CHECK CHECK
10 20 30 40
Every 3 years
EAU03884