Table of Contents
Advertisement
REPLACE OUTER SHIELD
1. Using a straight-blade
screwdriver, pry the two
Lens Peg Retaining Clips
outward then remove Pegs
and Outer Shield from
Helmet. (FIGS 2 & 3).
2. Reverse to install while
noting irregular shape of the
Pegs and location of short
tabs on ends of Shield.
REPLACE INNER SHIELD
1. Place the Helmet face-down
on a soft surface and grip
the lower edge of the Inner
Shield with a fingernail, pull
inward curling the Inner
Shield inward and remove
(FIG 4).
2. Reverse to install making
sure to slip the side edges of
Shield under the four tabs of
frame (FIG 4).
To order parts and supplies: 800.345.1178 >> eastwood.com
FIG. 2
FIG. 3
Clip
Peg
Battery Covers
Inner Lens
FIG. 4
Clip
Peg
Pry Here
Slot
Outer Lens
Peg Hole
7
Advertisement
Table of Contents
