Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Eastwood 21195
- Page 1 Part #21195 PANORAMIC WELDING HELMET INSTRUCTIONS...
-
Page 2: Safety Information
EASTWOOD WELDING HELMETS are specifically designed to provide maximum eye and face protection from harmful UV and IR radiation emitted when welding, in a lightweight, comfortable housing. The full 180° view provides additional visibility to the sides for added safety and convenience. - Page 3 DO NOT look at welding arcs requiring a shade level greater than 11 through the side viewing panels. • Eastwood welding helmets are designed to protect the user’s eyes and face from harmful radiation, sparks and spatter under normal welding conditions.
-
Page 4: Operation
The Shade Control Knob is divided into 2 separate ranges; one for shade levels 4 through 8 and one for shade levels 8 through 11. Shade 4 is lightest while shade 12 is darkest. The ranges are selected by the Range Switch located at the top of the helmet. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... - Page 5 TIG, GTAW – Gas Tungsten Arc Welding PAW – Plasma Arc Cutting PAC – MAG/C02 – Plasma Arc Cutting Metal Active Gas SAW – MIG (light) – MIG on Light Alloys Shielded Semi-Automatic Arc Welding To order parts and supplies: 800.345.1178 >> eastwood.com...
-
Page 6: Maintenance
NOTE: Do not use excessive glass cleaner or allow the lens assembly to become wet or the sensitive electronics will be destroyed. Never use solvents. • Clean headband with a cloth dampened with mild soap and water. Allow to dry thoroughly. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... - Page 7 2. Reverse to install making Battery Covers sure to slip the side edges of Shield under the four tabs of frame (FIG 4). Pry Here Inner Lens FIG. 4 Slot Outer Lens Peg Hole To order parts and supplies: 800.345.1178 >> eastwood.com...
-
Page 8: Troubleshooting
Replacement Outer Lens If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21195manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335...