Buffalo AirStation WBR2-G54S Quick Setup Manual page 5

◗
Wireless Confi guration
■ NOTE: If confi guring via a Wired Confi guration, please skip to the next page!
Windows 98SE/ME/2000/XP
If there is no Ethernet adapter available on the computer being used to confi gure
the AirStation, a wireless confi guration may be performed using a correctly
installed 802.11b or 802.11g wireless adapter.
To confi gure the AirStation via a wireless connection, establish a connection to
the AirStation using the setup instructions that came with the wireless client card
or adapter that you are using.
Identifying the Proper AirStation
The default SSID of the AirStation is its LAN MAC Address which was addressed
on Page 2 of this Quick Setup Guide. Using your wireless card's software or
Windows XP's Wireless Zero Confi g, connect to the Wireless Network that
broadcasts the LAN MAC Address of your AirStation as its SSID.
By default, the AirStation router does not have any encryption setup, thus,
bypass entering any encryption settings during your wireless adapter's
confi guration.
Please consult the documentation that came with your wireless client card or
adapter for further assistance.
5