Brother HL-1240 Technical Instructions page 2

2
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8
Brother HL-1240 Drum Unit Technical Instructions
Step 4
Using a swab and alcohol
corona wire.
Step 5
Remove the two screws holding the
cleaning brush.
(See Photo 4)
Step 6
With a small Phillips screwdriver remove
the screw holding the contact plate to the
cleaning brush contact.
(See Photo 5)
Step 7
When removing the cleaning brush, the
contact plate may stay inside the drum
unit. Remove the contact plate and clean.
(See Photo 6)
Step 8
Carefully clean the drum cleaning brush
using dry compressed air or a vacuum.
Step 9
Reinstall the contact plate onto the
cleaning brush.
(See Photo 7)
Step 10
Remove the "C" clip from the drum axle on
the non gear side.
(See Photo 8)
clean the