IEC power inlet on the rear panel of the SPV-1, and plug the male end of the power cord into a wall outlet. If using the SPV-1 with the Bryston SP1.7 connect the RS-232 cable (straight through with DB9 male con- nectors at one end and a 1/8”...
Pressing the OSD button will change the OSD assignment between compos- ite, S-video and component, sequence. USING THE BRYSTON SPV-1 WITH THE BRYSTON SP1.7 The combination of the Bryston SP1.7 Surround Processor and the SPV-1 Video Switcher provides for totally seamless integration of all audio and video functions.
IMPORTANT NOTES: The Component 1 input on the SPV1 will be active when TV/SAT, CD, or VCR is selected on the Bryston SP1.7 Preamp/Processor * The Component 2 input on the SPV1 will be active when DVD, AUX, or TAPE is selected on the Bryston SP1.7 Preamp/Processor *...
Page 5
SPV-1 DIAGRAMS: Front and Rear Panel Legends...
Page 7
SP1.7 and the SPV-1 Video Switcher. If you experience any difficulties in getting your SPV-1 working properly with your SP1.7, please contact either your dealer or the factory. SP1.7 firmware revision 41A (or greater) is required.
Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston.