Kogan 6 Series User Manual page 20

DVD MANUAL(cont'd)
DVD System setting
In this section, you will learn how to customize the default settings of the system
according to your needs.
Note：
Only change the system settings if there is no disc in the DVD player or if the DVD
player is not in operation.
To change your system settings, proceed as follows:
1.Press the DVD SETUP button on the remote control or on the DVD player.
2.The Setup menu is displayed. In this menu, you can define general settings, Audio
Setting settings, Preference Settings as well as other default settings. You can leave
the Setup menu at any time by pressing the DVD SETUP button again.
3.Use the and buttons on the remote control or on the DVD player to select the
desired submenu.
4.Use the ▼ and ▲ buttons on the remote control or on the DVD player to select the
desired option within the submenu.
General Setup
The illustration shows the options available in this submenu.
TV Display
To set the TV display mode.
Highlight the option using the ▼ and ▲ buttons. Switch to the option's
setting by pressing OK or . Possible settings are: 4:3 PS, 4:3 LB and 16:9
(default). Use the ▼ and ▲ buttons to highlight the desired setting and
confirm with OK. Press to exit the option's setting.
OSD Language: To set the language for the on-screen menu.
Highlight the option using the ▼ and ▲ buttons. Switch to the
option's setting by pressing OK or . Possible settings are:
English (default), German, Spanish, French etc..
Use the ▼ and ▲ buttons to highlight the desired setting and confirm
with OK. Press to exit the option's setting.
20