FLIR A500-EST Getting Started page 7

2 EN-US English
2.3 List of contents
• Infrared camera
• Lens
• Ethernet cable M12 to RJ45F (0.3 m), P/N T911869ACC
• Printed documentation including the username and password for log in to the
web interface of the camera
Note FLIR Systems reserves the right to discontinue models, parts or accesso-
ries, and other items, or to change specifications at any time without prior notice.
2.4 Additional equipment needed
To power the camera and for internet connection, the following standard equip-
ment (not included) is needed:
• Standard Ethernet cables, 2 pieces
• Power over Ethernet (PoE) injector
2.5 Extend your product warranty
Register your product now to get:
• 2 years camera warranty
To activate your extended warranty, go to http://support.flir.com/camreg.
Note Registration must be completed within 60 days of purchase.
2.6 Customer support
Do not hesitate to contact our Customer Support Center at http://support.flir.com
if you experience problems or have any questions about your product.
2.7 Training
For training resources and courses, go to
http://www.flir.com/support-center/training.
2.8 Quick start guide
1. On the computer to be used for managing the camera, download FLIR IP
Config from http://support.flir.com, and then install it.
2. Connect the camera to power and the network. Do the following:
#T810566; r. AA/70271/70271; mul 4