Easylink - Philips HMP7001 User Manual

10 EasyLink

This player supports Philips EasyLink which uses the HDMI CEC (Consumer
Electronics Control) protocol. You can use a single remote control to control
EasyLink compliant devices that are connected through HDMI.
1
Connect the HDMI CEC compliant devices through HDMI, and turn on the
HDMI CEC operations on the TV and other connected devices (see the
user manual of the TV or other devices for details).
2
Press .
3
Select [Setup] > [Easy Link].
4
Select [On]under the options:
‡ [Easy Link] > [On]
‡ [One Touch Play] > [On]
‡ [One Touch Standby] > [On]
‡ [Auto Power On From TV] > [On]
» EasyLink function is turned on.
One Touch Play
:KHQ \RX SOD\ D ÀOH ZLWK WKLV SOD\HU WKH FRQQHFWHG +'0, &(& 79 DXWRPDWLFDOO\
switches to the HDMI input channel.
One Touch Standby
When you switch a connected device (for example TV) to the standby
mode with its own remote control, this player switches to the standby mode
automatically.
Auto Power On From TV
When you switch a connected device (for example TV) to this player port with
its own remote control and this player is standby mode, this player switches to
the power on mode automatically.
Note
‡
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
32 EN
All manuals and user guides at all-guides.com