Easylink - Philips HMP7020 User Manual

6

EasyLink

HMP7020 supports Philips EasyLink which uses the HDMI CEC (Consumer
Electronics Control) protocol. You can use a single remote control to control
EasyLink compliant devices that are connected through HDMI.
1
Through HDMI, connect HMP7020 to a TV compliant with the HDMI CEC
protocol.
2
On the TV, switch on the functions to allow HDMI CEC operations (Consult
the user manual of the TV).
3
On HMP7020, switch on [Easy Link].
On the Home screen, select [Setup] > [Easy Link]. Select [On].
•
4
In [Easy Link], you can select the following options:
[One Touch Play]
When you start play on HMP7020, the TV switches to the HDMI input channel
automatically.
[One Touch Standby]
When you switch the TV to the standby mode, HMP7020 switches to the
standby mode automatically.
[Auto Power On From TV]
When you switch to the input channel of HMP7020 on the TV, HMP7020 can
switch on automatically from the standby mode.
Note
•
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
EN
36