Sharp CD-K7000W Service Manual page 13

How to remove the belt (TAPE 1) (See Fig. 13-1)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
How to remove the belt (TAPE 2) (See Fig. 13-1)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
How to remove the motor (See Fig. 13-2)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
FF/REW
TAPE2
Belt
(E2)x1
Main Belt
Figure 13-1
CD MECHANISM SECTION
Perform steps 1, 2, 3, 13 and 16 of the disassembly method
to remove the CD mechanism.
How to remove the loading motor
(See Fig. 13-3)
1. Bend the hooks (A1) x 5 pcs., to remove the loading motor.
How to remove the pickup (See Fig. 13-4)
1. Remove the stop washer (B1) x 1 pc., to remove the gear
(B2).
2. Remove the screws (B3) x 2 pcs., to remove the shaft (B4).
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
All manuals and user guides at all-guides.com
Motor
Motor
TAPE1
Main Belt
TAPE2
(D1)x1
Main Belt
(E1)x1
TAPE1
FF/REW
Belt
(D2)x1
CD-K7000W/C7000W,CP-C7000
(F1) x2
Ø2.6x5mm
Stop Washer
(B3) x2
(B1) x1
ø2.6 x6mm
Shaft
Gear
(B4) x1
(B2) x1
– 13 –
Motor
Figure 13-2
Loading Motor
(A1)x1
(A1)x2
(A1)x2
CD Base
Figure 13-3
Pickup
CD Mechanism
Figure 13-4