Saftronics HPVFE Manual page 47

15"Anlg Invert"
Terminal Block Group
16-27
t211 [Anlg In 0-10V Lo]
Sets the analog input level that corresponds to
Analog inversion can be accomplished by setting this value larger than
option 15 "Anlg Invert".
Values Default
Min/Max:
Display:
t212 [Anlg In 0-10V Hi]
Sets the analog input level that corresponds to
Analog inversion can be accomplished by setting this value smaller than
option 15 "Anlg Invert".
Values Default
Min/Max:
Display:
t213 [Anlg In4-20mA Lo]
Sets the analog input level that corresponds to
Analog inversion can be accomplished by setting this value larger than
option 15 "Anlg Invert".
Values Default
Min/Max:
Display:
t214 [Anlg In4-20mA Hi]
Sets the analog input level that corresponds to
Inverts the scaling of the analog input levels set in
[Anlg In 0-10V Lo] and t212
(continued)
[Anlg In4-20mA Lo] and t214
Reserved
P104 [Minimum Freq] if a 0-10V input is used by
t212 [Anlg In 0-10V Hi] or by setting
0.0%
0.0/ 100.0%
0.1%
P105 [Maximum Freq] if a 0-10V input is used by
t211 [Anlg In 0-10V Lo] or by setting
100.0%
0.0/ 100.0%
0.1%
P104 [Minimum Freq] if a 4-20mA input is used by
t214 [Anlg In4-20mA Hi] or by setting
0.0%
0.0/ 100.0%
0.1%
P105 [Maximum Freq] if a 4-20mA input is used by
46
t211
[Anlg In 0-10V Hi] or t213
[Anlg In4-20mA Hi].
Related Parameter(s): d020, P104, P108, t201, t202
P108 [Speed Reference].
t201 - t202 [Digital Inx Sel] to
Related Parameter(s): d020, P105, P108, t201, t202
P108 [Speed Reference].
t201 - t202 [Digital Inx Sel] to
Related Parameter(s): d021, P104, P108, t201, t202
P108 [Speed Reference].
t201 - t202 [Digital Inx Sel] to
Related Parameter(s): d021, P105, P108, t201, t202
P108 [Speed Reference].