INDEX 1. FOREWORD ..............................3 2. SAFETY ...............................3 3. PRODUCT INTRODUCTION ..........................4 3.1. F ..........................4 OLLOW THE TANDARDS 3.2. A ............................4 PPLICATION ANGE 3.3. M ........................4 ECHNICAL ARAMETERS 3.4. N ..............................5 ULES 3.5. P .......................5 RODUCT UNCTIONS AND EATURES 3.6. P ........................6 RODUCT ARTS...
After charging is completed, be sure to hang the charging gun properly back into the charging gun base. ◼ Pay special attention to the fact that the charging gun head cannot be placed at random, suspended, or dropped on the ground to avoid a safety accident. Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
It can operate normally in a humid, salty environment. The charging pile shell and the exposed iron bracket and parts take double-layer anti-rust measures, and the non-ferrous metal shell also has an anti-oxidation protective film or anti-oxidation treatment; Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
The style is colorful; ◼ According to special requirements, it can be compatible with new and old standard electric vehicle charging. 3.6. Product Parts Introduction 1) EV Charger with Socket 2) EV Charger with Socket Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
2) Do not let the sharp object scratch the product and parts during installation, avoid the appearance of scratches caused by the mutual scratching between the parts, and pay attention to the use of tools, pay attention to personal safety. Installation steps: 1) Wall-mounted installation 2) Column installation: Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
Make sure the input power parameters Ensure charging safety. parameter match the charging stub. Exposed wiring must be protected by Charging pile Protect line from effective measures such as conduits to line process damage. avoid crushing or scratching the wires. Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
Equipment failure: red light flashes. c) Charging: Green light flashes. 4.3. System Setup and Networking For the standard operating version of the charging pile, initial configuration and networking operations are required. The specific networking structure is as follows: Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
After the electric vehicle owner connected the charging gun correctly, it starts to charge, and the LED flashes a green light. After the charging is full, the EV charger is automatically cut off, the LED indicator is blue, and the charging gun can be unplugged. Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
Page 11
In an emergency situation, press the emergency stop button, the EV charger ends charging, and the LED indicates red flashing. After releasing the emergency, rotate and open the button, and the LED indicator is constantly blue. Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
LED status indicator does is supplying power normally, and the circuit is not on not light before charging or breaker is closed; during charging. 3: Make sure the Reset Button is pulled down and the circuit breaker is closed. Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
Need help?
Do you have a question about the SUN-7KW-EV1 and is the answer not in the manual?
Questions and answers